Hybrid One Armed Rear '13-'23 BMW Single Sided Hubs

The new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but on BMW bikes, you cannot use this stand on the non-drive side of the motorcycle.

When installed on the drive side, it allows wheel removal. It offers solid leverage and stability and the ball bearing head makes it easy to spin the wheel for cleaning and maintenance.

Sold complete, but pins are interchangeable to fit other bikes.

Fits '13-'23 BMW R9T, R1200, K1300, depending on hub version. BMW changed the hub I.D. ever-so-slightly in '13 for some models but made the same change in '18 on other models. See fitting notes for exact years. We recommend the F0109-450 for the R1250 models due to the need for additional leverage. This stand will fit the R1250 as well as the pin is the same size, but leverage will be very poor.

Does not fit: Any 1600 models or the newer R18 models(exhaust blocks access)

Steel inner pin with aluminum outer sleeve for lighter weight on large diameter pin. This pin is slightly larger than the original B pin that was used on the earlier '05+ BMW's. This size hub was scaled in by BMW starting in 2013, but not all 13+ models will use it.

Please see product fitting notes and/or our PDF fitting chart for more info. If you're not sure which hub you have, measure your hub with calipers and call us. We cannot provide dimensions on our products, but we can tell you which pin you'll need for your hub if you provide a measurement.